Intel Launches Flurry of 3D NAND-Based SSDs For Consumer and Enterprise Markets

MojoKid writes: Intel launched a handful of new SSD products today that cover a broad spectrum of applications and employ 3D NAND technology. The SSD 600p Series is offered in four capacities ranging from 128GB, to 256GB, 512GB and 1TB. The drivers are targeted at consumer desktops and notebooks and are available in the M.2 form-factor. The entry-level 128GB model offers sequential reads and writes of up to 770 MB/sec and 450 MB/sec respectively. At higher densities, the multi-channel 1TB model offers sequential reads and writes that jump to 1, 800 MB/sec and 560 MB/sec respectively. The 128GB SSD 600p weighs in at $69, while the 1TB model is priced at $359, or about .36 cents per GiB. For the data center, Intel has also introduced the DC P3520 and DC S3520 Series SSDs in 2.5-inch and PCIe half-height card form-factors. Available in 450GB to 2TB capacities, the range-topping 2TB model offers random reads/writes of 1, 700 MB/sec and 1, 350 MB/sec respectively. Finally, Intel launched the SSD E 6000p (PCIe M.2) and SSD E 5420s Series (SATA). The former supports Core vPro processors and is targeted at point-of-sale systems and digital signage. The latter is aimed at helping customers ease the transition from HDDs to SSDs in IoT applications. Read more of this story at Slashdot.

Read the article:
Intel Launches Flurry of 3D NAND-Based SSDs For Consumer and Enterprise Markets

George Takei Opposes Gay Sulu In ‘Star Trek Beyond’

HughPickens.com writes: Seth Abramovitch reports in the Hollywood Reporter that actor and LGBT activist George Takei says Paramount’s plans to have Sulu’s character in the upcoming ‘Star Trek Beyond’ the first LGBTQ lead character in Star Trek history is out of step with what creator Gene Roddenberry would have wanted. [Roddenberry] “was a strong supporter of LGBT equality, ” says Takei, now 79. “But he said he has been pushing the envelope and walking a very tight rope — and if he pushed too hard, the show would not be on the air.” Takei says he’d much prefer that Sulu stay straight. “I’m delighted that there’s a gay character, ” says Takei. “Unfortunately, it’s a twisting of Gene’s creation, to which he put in so much thought. I think it’s really unfortunate.” The timeline logic of the new revelation is enough to befuddle even the most diehard of Trek enthusiasts, as the rebooted trilogy takes place before the action of the original series. In other words, assuming canon orthodoxy, this storyline suggest Sulu would have had to have first been gay and married, only to then go into the closet years later. Simon Pegg, who has co-written the latest Star Trek movie, as well as starring as Scotty, has responded to criticism by the actor George Takei at the film-makers’ decision to make the character he used to play openly gay. “He’s right, it is unfortunate, it’s unfortunate that the screen version of the most inclusive, tolerant universe in science fiction hasn’t featured an LGBT character until now. We could have introduced a new gay character, but he or she would have been primarily defined by their sexuality, seen as the ‘gay character, ‘ rather than simply for who they are, and isn’t that tokenism?” says Pegg. “Our Trek is an alternate timeline with alternate details. Whatever magic ingredient determines our sexuality was different for Sulu in our timeline. I like this idea because it suggests that in a hypothetical multiverse, across an infinite matrix of alternate realities, we are all LGBT somewhere.” Read more of this story at Slashdot.

See the article here:
George Takei Opposes Gay Sulu In ‘Star Trek Beyond’

This tattoo-like display is made possible by a new ultra-thin protective ‘E-skin’

 It sounds like something out of Star Trek: a patch thinner than a band-aid that you slap on your arm and, within moments, it lights up with heart rate, blood sugar, and so on — then peels off a few days later. That’s the goal of work by researchers at the University of Tokyo. Read More

See the original post:
This tattoo-like display is made possible by a new ultra-thin protective ‘E-skin’

ACLU map shows locations of 63 ongoing phone-unlocking cases

 In case you thought the recently and abruptly terminated fracas in San Bernardino was an isolated incident, the ACLU has put together a handy map of cases around the country where the All Writs Act has been used to justify an order to unlock a smartphone. Read More

Taken from:
ACLU map shows locations of 63 ongoing phone-unlocking cases

Get Ready For The New iPad

 Rumor has it that Apple is about to introduce a successor to the iPad Air 2 at next week’s press conference. According to 9to5mac’s Mark Gurman, the device could move away from the $499 entry-level price. Next week’s 9.7-inch iPad could start at $599 with 32GB of storage. Read More

More here:
Get Ready For The New iPad

Intel and Micron Partnership Soon To Launch 10TB SSD For Enterprise Market

MojoKid writes: Intel and Micron have been tag-teaming various storage and memory technologies and word on the web is that the fruits of that partnership is a 10-terebyte SSD that’s right around the corner. The largest SSD in Intel’s stable at the moment is 4TB, which itself is pretty large. However, both Micron and Intel are of the opinion that typical planar NAND flash memory has gone about as far as it can go, and that 3D stacked Flash memory is the future. They’ve also developed a “floating gate cell” design – a first for 3D stacked memory – resulting in 256Gb multi-level cell (MLC) and 384Gb triple-level cell (TLC) die that fit inside of a standard package. The two companies are targeting gumstick-sized SSDs reaching 3.5TB and regular 2.5-inch SSDs hitting (and even surpassing) 10TB. Apparently that’s about to become a reality. Read more of this story at Slashdot.

Link:
Intel and Micron Partnership Soon To Launch 10TB SSD For Enterprise Market

This Semi-Automatic Gun Is “95 Percent” 3D Printed

 Another day, another 3D-printed gun. This one comes to us from a carpenter from West Virginia who calls himself Derwood. His gun is “95 percent” 3D printed which means the important bits – springs, firing pins, etc. – are handmade or repurposed (the barrel comes from a Glock) while the stock, magazine, and upper and lower receivers are printed on a Fusion F306 3D… Read More

Read the article:
This Semi-Automatic Gun Is “95 Percent” 3D Printed

Oculus Co-Founder Confirms The Rift Will Be Sold At Cost

 The Oculus Rift will be sold with a $599 retail price. And Oculus is taking a wash on the hardware. Oculus Co-Founder and VP of Product, Nate Mitchell, revealed to TechCrunch’s Jordan Crook earlier today that the company is selling the hardware at cost in an effort to kickstart the VR ecosystem. This is on top giving away 7, 000 Oculus Rift units to early Kickstarter backers. At $600, … Read More

Read More:
Oculus Co-Founder Confirms The Rift Will Be Sold At Cost

Samsung’s ‘Rink’ Motion Controllers For Gear VR Look Pretty Great

 A few days ago, Samsung shared a few items that they’d be showing on the floor at CES in Las Vegas. One of them, which barely caused a blip on the radar was the “rink.” It’s Samsung’s motion controllers for the Gear VR, something that is sorely needed for their mobile virtual reality experience. If you remember, Oculus just shared that their own motion… Read More

Read More:
Samsung’s ‘Rink’ Motion Controllers For Gear VR Look Pretty Great

Chicago And Los Angeles Are Next Up For Google Fiber

 You know the drill. Once a city has spoken with Google about bringing Fiber into their hood, there’s a process for the city to go through. A lengthy one. Checklists. The whole nine yards. Two new cities are exploring Fiber with Google and they are Chicago and Los Angeles. Yes, San Francisco has been skipped again and I’m going to go cry into my slow internet from Comcast.… Read More

Read More:
Chicago And Los Angeles Are Next Up For Google Fiber