Mad Catz C.T.R.L.i is an iOS 7 controller with Xbox heritage (hands-on)

Best known for its range of console and PC gaming accessories, Mad Catz has made huge strides over the past year to cater for mobile gamers. After it launched its M.O.J.O. Android gaming console in June, the peripheral maker has emerged at Mobile World Congress with C.T.R.L.i, its first controller to feature native support for iOS 7. While it’s still in the prototype stage (so new, we were the first to see it), the C.T.R.L.i is was fully playable when we discussed specifics with Mad Catz’s representative, allowing us to experience an almost final version of the gamepad when it launches publicly in April. If the C.T.R.L.i looks familiar, that’s because it’s basically the same as the accessory maker’s award-winning MLG Pro Circuit controller for Xbox 360. Swapping consoles for handhelds, Mad Catz has introduced a spring-loaded mount to cater for Apple’s current iPhone range and any larger devices it may or may not decide to launch in the near future ( cough , 5-inch iPhone, cough ). The clip is fixed with a tiny screw, allowing iPad gamers to play wirelessly fear of a giant clip obstructing their view. In the past, iOS 7 controllers have been called out for their high price and low build quality, but in our short time with the C.T.R.L.i prototype, we were impressed with how stable the controller remained while we played, and our iPhone looked to be in no danger of falling out. When Mad Catz finally makes the Bluetooth gamepad available in early Spring, it’ll be available in black, white, blue, red, orange and will carry an $80 price-tag. That’s cheaper than the most MFi devices already on the market, but we’re still looking for that golden sticker price to make it a real impulse buy. Comments

More:
Mad Catz C.T.R.L.i is an iOS 7 controller with Xbox heritage (hands-on)

HP’s Pavilion x360 convertible has a low price, decidedly Yoga-like design

If imitation is the sincerest form of flattery, Lenovo ought to be tickled right now. HP just announced the 11-inch Pavilion x360, and it takes more than a few cues from Lenovo’s iconic Yoga design. Not only does it have a 360-degree hinge allowing it to be used in four modes, but HP is even using the same terminology to describe how it works (think: “stand mode” for when the keyboard is folded under, and “tent mode” when the machine balanced upside down). Also like the Yoga, the keyboard disables automatically when you flip the screen back into tablet mode. So how is it different? Cost, really. Whereas most convertible notebooks command flagship prices, the x360 starts at $400. (For comparison’s sake, even Lenovo’s mid-range ” Flex ” convertibles still cost $549 and up.) Of course, a lower price means lesser specs, which in this case include a Pentium-series Intel Bay Trail processor, a 500GB hard drive (no SSDs here) and a 1, 366 x 768 display. On the bright side, the display uses IPS technology for wider viewing angles, and HP also included Beats Audio. So the sound quality, at least, might be better than what the Lenovos of the world have to offer. Three USB ports and a full-sized HDMI socket might further sweeten the deal for prospective buyers. As for battery life, HP isn’t yet saying how long the two-cell battery is expected to last, though a company rep did assure us the final runtime would exceed four hours (on a portable, three-pound laptop, we’d actually hope for more than that). Look for the x360 to ship this week, on February 26th, with a red color available to start, and a silver shade following later. In the meantime, we’re sure to get a peek at Mobile World Congress, so stay tuned for hands-on photos and some early impressions. Filed under: Laptops , HP Comments

See more here:
HP’s Pavilion x360 convertible has a low price, decidedly Yoga-like design

This Centuries-Old Musical Instrument Sounds Exactly Like Super Mario

Listen to this young girl playing her sheng , a Chinese instrument invented thousands of years ago. The woodwind may be ancient, but the sound is pure 1980s nostalgia—it’s the Super Mario Brothers theme, right down to the sounds of Mario collecting coins and mushrooms. Amazing! Read more…        

View article:
This Centuries-Old Musical Instrument Sounds Exactly Like Super Mario

Microsoft is cutting Windows prices to compete with Android and Chrome OS

At present, it’s tricky to make Windows PCs that cost as little as basic Android tablets and Chromebooks . While Microsoft charges vendors $50 to use Windows, Google often gives its software away. The crew in Redmond may have found a way to narrow the price gap, though. Bloomberg claims that Microsoft is cutting Windows 8.1’s license fee to $15 for any device that sells for less than $250, letting builders offer very cheap Windows PCs without destroying their profits. The developer isn’t commenting on the reported discount, but this would be a familiar strategy; Microsoft slashed Windows XP’s pricing to wipe out Linux netbooks a few years ago. There’s no guarantee that the company will repeat its earlier success if the lower Windows 8.1 prices take effect. However, it may feel compelled to act when PC shipments are still declining and mobile OS tablets are on the rise — the status quo clearly isn’t working. Filed under: Laptops , Tablets , Software , Microsoft , Google Comments Via: The Verge Source: Bloomberg

More:
Microsoft is cutting Windows prices to compete with Android and Chrome OS

This New App Wants to Fight Your Parking Tickets For You

It’s happened to all of us. You get back to your car after a delicious brunch or productive visit to the bookstore only to find a demonic little slip of paper tucked under your windshield wiper. “But the meter was broken!” you think. “I’m going to contest this!” you say to yourself. No, you’re not. Read more…        

Read the original post:
This New App Wants to Fight Your Parking Tickets For You

Next-generation Broadwell NUCs coming late 2014, says leaked roadmap

Ivy Bridge NUC on top, Haswell NUC on the bottom. What will the next one look like? Andrew Cunningham Intel’s “Next Unit of Computing” (NUC) mini desktops are apparently one of the few segments in the PC industry actually seeing some growth, and a new roadmap leaked by FanlessTech  shows that Intel is already planning the next versions. According to the roadmap, Intel is planning three new NUC models based on next-generation Broadwell chips, all scheduled to launch toward the end of 2014. FanlessTech [ars_story_side post_id=”397297″][/ars_story_sidebar]Two of the new NUC models are targeted at consumers, and will use next-generation Core i3 and Core i5 CPUs codenamed “Rock Canyon.” Like the current Haswell NUCs, they will include USB 3.0, mini HDMI, and mini DisplayPort outputs. The mini DisplayPort outlets can power either a 4K display or three lower-resolution displays simultaneously. The mSATA slot that current NUCs use for their SSDs will be replaced by an M.2 slot , which can provide faster storage speeds via the PCI Express bus. Wi-Fi, Bluetooth, and an IR sensor will both be built in, as will a bay for a standard 2.5-inch hard drive. The most interesting departure from current NUCs will be swappable lids, which can add either NFC or wireless charging capabilities to the NUCs. The idea of using a desktop as a wireless charging pad isn’t entirely new—we saw a desktop or two that offered this capability at this year’s CES—but a NUC-sized box could serve as a nice wireless charging pad for smartphones and tablets. Read 2 remaining paragraphs | Comments        

Read more here:
Next-generation Broadwell NUCs coming late 2014, says leaked roadmap

Netflix packets being dropped every day because Verizon wants more money

Anthony Fine The battle over who should pay to carry Netflix traffic is heating up again, and one of the main players blames Verizon’s greed for the poor performance that many consumers see when trying to watch streaming video. Cogent Communications CEO Dave Schaeffer made his case in an interview with Ars yesterday, saying Verizon is refusing to upgrade the infrastructure that carries Internet traffic from one network to another unless outrageous demands for payment are met. The network connections between Cogent and Verizon, crucial for carrying streaming video and other content to Verizon’s home Internet customers, “are full,” Schaeffer said. “They are more than full. They are so full that today a significant amount of packets are being dropped between the networks.” Read 39 remaining paragraphs | Comments        

Visit site:
Netflix packets being dropped every day because Verizon wants more money

Apple releases iOS 7.0.6 and 6.1.6 to patch an SSL problem

Andrew Cunningham Apple has just released iOS 7.0.6, the sixth minor update to iOS 7 . Both it and the new iOS 6.1.6 update “provide a fix for SSL connection verification,” their only documented addition. Unlike iOS 7.0.5 , which applied only to a few international iPhone 5S and 5C models, the version 7.0.6 update applies to all devices that can run iOS 7. iOS 6.1.6 applies to the iPhone 3GS and fourth-generation iPod touch. The update to iOS 6 is marginally more interesting than the iOS 7 update, just because Apple has so rarely patched old iOS versions after they’ve been replaced. The company also released version 6.1.5 for the fourth-generation iPod touch to correct a FaceTime connectivity issue. It’s possible that Apple is trying to provide critical security updates to older devices dropped by newer iOS updates, something it also does for older OS X versions for a while after they’re superseded by newer software. The next major iOS 7 update is iOS 7.1, currently in its fifth developer beta. Current rumors suggest it will be released to the public in early or mid-March, and it should include more significant fixes than the six minor updates we’ve seen since September. Read on Ars Technica | Comments        

See more here:
Apple releases iOS 7.0.6 and 6.1.6 to patch an SSL problem

Google Redesigns News Archive, Makes Searching Through Newspapers Easy

Ever need to track down an old newspaper clipping? In olden times, you’d need to head into the library’s microfiche section and dig through boxes of film. Now, it’s as easy as heading over to Google’s recently relaunched and easier to search through news archive. Read more…        

Continue reading here:
Google Redesigns News Archive, Makes Searching Through Newspapers Easy

Joris Laarman’s Latest ‘Anti-Gravity’ 3D Printer Basically Conjures Metal Out of Thin Air

About nine months ago, we got a first look at a freely articulating 3D printer , developed by Joris Laarman Lab in collaboration with the Institute for Advanced Architecture of Catalonia (IAAC). By extruding a special fast-curing resin with a multi-jointed robotic arm, MATAERIAL proposed a “radically new 3D printing method, ” suitable for “irregular or non-horizontal surfaces.” Now, the Dutch designer has unveiled his latest breakthrough in liberating digital fabrication from a build platform: As its name suggests, MX3D-Metal can print lines of steel, stainless steel, aluminum, bronze or copper “in mid-air.” The MX3D-Metal reportedly debuted at last week’s Fabricate2014 conference and will make its way to New York City’s Friedman Benda gallery come May . Laarman shared some more information on his approach and what’s next for the team. Our Amsterdam-based lab is an experimental playground that tinkers with engineers and craftsmen on the many new possibilities of emerging technology in the field of art and design. We usually start working on projects based on the concept “what if…?” after which we start figuring out how we could hack or combine certain technologies to make something new. Usually, this results in a new series of design pieces with a form language; and this arises out of the new possibilities of the new technology. We believe we tackle technological challenges very differently than others by using a hands-on approach to create such design objects. Over the years, our lab has worked this way together with many inspiring people in the field of digital fabrication and computational design. We’ve worked with professionals and students from institutes like MIT, IAAC, ETH and the Architectural Association to develop new concepts for the digital fabrication revolution. For some time now, we’ve held two research positions at our lab. The purpose of this role is pure experimentation with digital fabrication under our supervision—and with the help of craftsmen and software and robotic engineers. Recently, the technical side of our work at the lab is supported by Autodesk. The reason for this is so we don’t just end up with a new series of design objects; it’s so we can bring technology to a higher level. (more…)

See more here:
Joris Laarman’s Latest ‘Anti-Gravity’ 3D Printer Basically Conjures Metal Out of Thin Air