Waze 4.0 Brings a New Interface, Smart Reminders, ETA Panel and More

Android: Waze, one of our favorite mapping apps , released a new version version for Android today. Waze 4.0 comes with a brand new interface, smart reminders based on your calendar events, and a lot more. Read more…

Read More:
Waze 4.0 Brings a New Interface, Smart Reminders, ETA Panel and More

Watch 130-Year-Old Samurai Armor Get Restored to a Pristine and Fearsome State 

Iki-ningyō are life-sized dolls that were primarily used in festivals and exhibitions in Japan. This one, which belongs to the Victoria and Albert Museum, is estimated to have been made around 1880, shortly after the samurai class was outlawed. Read more…

Continued here:
Watch 130-Year-Old Samurai Armor Get Restored to a Pristine and Fearsome State 

Free Emulator Lets You Play Classic 8-Bit Nintendo Games in 3D

3D TVs may have gone the way of the Dodo, but as the Oculus Rift has proven, a third dimension can make video games far more immersive. That even goes for the 2D Nintendo classics you grew up playing, thanks to a new emulator with a intelligent algorithm that automatically converts those games to 3D. Read more…

View the original here:
Free Emulator Lets You Play Classic 8-Bit Nintendo Games in 3D

ScummVM, Update With a Bang

KingofGnG writes: The developers of ScummVM have announced a new version for the virtual machine preferred by graphic adventure fans: also known as “Lost with Sherlock, ” ScummVM 1.8.0 is hailed as one of the heftiest releases ever prepared by the team, with the addition of many games and game engines, the substantial update of graphics and sound sub-systems and the availability of new conversions for minor platforms. Read more of this story at Slashdot.

Read the original post:
ScummVM, Update With a Bang

Watch Two Guys Build This Gorgeous House From Scratch Using Only Hand Tools

We can just about guarantee you’ve never seen a home built this way. Nor witnessed every step of the process. Literally every step; these two guys start off by felling the freaking trees that they will themselves process into lumber, then proceed to erect an entire house, with a process and results that are about as green as you can get: (Did you spot the shou sugi ban wood-burning-and-preserving technique being used?) So who are these guys? One of the men in the video is Jacob, the founder of Latvia-based John Neeman Tools . That’s a small company of craftsmen and friends who produce hand-forged hand tools and knives, with multiple skillsets between them: Traditional carpentry, bladesmithing and leather crafting. I believe the other gent is Siluan, one of the company’s master carpenters, judging by the company’s crew page . The fact that they haven’t splashed their names, nor even the company’s name, across the video is telling; they seem less interested in self-promotion and more interested in sharing their craftsmanship. Which as you saw, is crazily impressive. “In the building process [we] used mostly traditional carpenters hand tools—axes, hand saws, timber framing chisels and slicks, old Stanley planes, augers, draw knives and mostly human energy, ” Jacob writes. “All the [foundation digging] was done by hand with shovels.” Some of the details: Built Using Local Materials [We built the] house from trees that [we] felled with an axe and two man crosscut saw in my own forest. The foundation consists mostly of bigger and smaller rocks and boulders. Lime, sand and concrete mixture are using only in small amounts—to hold the boulders together. The visible part over the ground level—boulder mosaic has been masoned with hand split local granite. Done on Nature’s Schedule [We felled the trees] following the research of old carpenter’s calendar that coniferous trees should be felled in January’s first days when the new moon rises and the deciduous trees should be felled in the winter time during the old moon. In winter time trees are sleeping and the juice and moisture content is very low in them. As time passes timber felled in winter becomes light and strong. Multiple Design Influences The House has been built based on the western part of Latvia – Kurland/Kurzeme (German influence) historical wooden architecture typical technique—Timber Frame construction with sliding log walls between the posts. House is two carpentry technique union—Timber Frame (that is typical in France, Germany, Great Britain, North America and other countries) and traditional Latvian log building technique, between the logs using moss from the local swamp. There Are No Fasteners In the walls, timber frame and roof construction there I used only wood joints and wooden pegs to hold the main construction together—no nails, screws or steel plates. Primarily Natural Materials, Yet High Thermal Efficiency Walls are insulated with 250mm thick dry pine and larch shaving layer (leftover from the local cabinet makers workshop). Overall exterior wall thickness is 50cm. In the walls (except wind vapour breathable membrane over the roof) has not been used any plastic or modern synthetic materials. Roof walls are insulated with ecological wood fibre wool and wood fibre panels. Over the wood fibre panels are plastered natural plaster—mixture of sand, clay powder, lime, linen fibre, salt, wheat flour. Overall thickness of the plaster is 20mm and over all amount of plaster used on the walls are 5000 kilos. It works also as thermal mass and improves energy performance. Exterior measurements of the house is 6.5 x 13 meters. Living space in both floors are 120sq/m. The house is being heated with clay plastered brick bread oven and smaller oven made of clay tiles in the kitchen. To heat up both floors of the house, when outside it is minus 10 degrees (Celsius) only small oven is heated once a day. When [the temperature] gets below -15, -20 C, we heat up the bread oven. Once it is heated, because of it+s thermal mass of 5 tons, it keeps the warmth 2-3 days. To heat up all the house (120 sq/m) in the winter time we use not more than 4 m3 of dry firewood. This is 2nd winter we are living there and we still heat up the house with the leftovers of lumber from the building process. And it will be enough for 3 more years. Built to Last for Five Centuries To preserve the wood from the spoiling, fame posts, sills, top beams and final cladding boards are treated with fire and pine tar mixed with Tung oil. This wood preservation technique was adapted from the Japanese traditional wood preservation technique Shou Sugi Ban ( ??? ). Exterior cladding boards [require] recoating each 10-15 years. [With the] Tung oil and pine or birch tar mixture, the house can last more than 500 years. As an example [there are] Norwegian stave churches that [have stood] more than 500 years until [today]. Roofing is three layer white oak shingles (each 10mm thick, 120mm wide and 720mm long) laid in two directional technique. Overall amount of shingles used is 15 000 pieces. Why Do It This Way? I have fulfilled my vision to a build natural, ecological house with high thermal efficiency, low energy consumption, sustainable, using local materials such as—wood, stone, old and new clay bricks, moss, linen fibre, clay, water, lime, wheat flour, salt and wood shavings.

See the article here:
Watch Two Guys Build This Gorgeous House From Scratch Using Only Hand Tools

Seagate Debuts World’s Fastest NVMe SSD With 10GBps Throughput

MojoKid writes: Seagate has just unveiled what it is calling “the world’s fastest SSD, ” and the performance differential between it and the next closest competitive offering is significant, if their claims are true. The SSD, which Seagate today announced is in “production-ready” form employs the NVMe protocol to help it achieve breakneck speeds. So just how fast is it? Seagate says that the new SSD is capable of 10GB/sec of throughput when used in 16-lane PCIe slots. Seagate notes that this is 4GB/sec faster than the next-fastest competing SSD solution. The company is also working on a second, lower-performing variant that works in 8-lane PCIe slots and has a throughput of 6.7GB/sec. Seagate sees the second model as a more cost-effect SSD for businesses that want a high performing SSD, but want to keep costs and power consumption under control. Seagate isn’t ready yet to discuss pricing for its blazing fast SSDs, and oddly haven’t disclosed a model name either, but it does say that general availability for its customers will open up during the summer. Read more of this story at Slashdot.

Visit link:
Seagate Debuts World’s Fastest NVMe SSD With 10GBps Throughput

Man has fun pranking email scammers

https://youtu.be/KDc-M4dHr0s?list=PLSKUhDnoJjYmeW6nNasZSaVAGh4u91pEk I’m enjoying James Veitch’s weekly video series where he has fun with email scammers. In this episode, James has an exchange with a US soldier named Mary Gary who discovered a buried safe while on a routine patrol and wants to share the $15 million booty with James.

Visit site:
Man has fun pranking email scammers

How Emulators Perform on the Raspberry Pi 3

By far, the most popular DIY project for the Raspberry Pi is to use it as a retro game console . So, with the release of the Raspberry Pi 3 a lot of people are curious how it performs in comparison to older models. Adafruit did a live stream showing just that. Read more…

See more here:
How Emulators Perform on the Raspberry Pi 3

Man hacks Tesla firmware, finds new model, has car remotely downgraded

The image that hacker Jason Hughes found hidden in Tesla’s latest Model S firmware. (credit: Jason Hughes) It seems Tesla is set to bump the battery capacity of its Model S sedan up to a hefty 100kWh some time in the near future. We know this thanks to the work of a white-hat hacker and Tesla P85D owner named Jason Hughes. Hughes—who previously turned the battery pack from a wrecked Tesla into a storage array for his solar panels—was poking around in the latest firmware of his Model S (version 2.13.77) and discovered an image of the new car’s badge, the P100D. Hughes let the world know via a cryptic tweet: @elonmusk @teslamotors #tesla I know your secret. SHA256 of best part: 5fc38436ec295b0049f186651ebba5fd55e8d7b81eb61cbd00d3f1bf18dd9c81 — Jason Hughes (@wk057) March 4, 2016 That message was soon decrypted by enthusiasts on the Tesla Motors Club forum, at which time Hughes posted a copy of the picture: Read 3 remaining paragraphs | Comments

Link:
Man hacks Tesla firmware, finds new model, has car remotely downgraded

Using Kexec Allows Starting Linux In PlayStation 4

jones_supa writes: Team fail0verflow, the hacker group who made Sony PlayStation 4, has introduced another method to start Linux in the game console. Instead of the previous exploit which was based on a security hole in an old PS4 firmware version, the new trick allows a kexec call to start Linux through Orbis OS (the FreeBSD-based system software of PS4). The code can be found in GitHub. Maybe this will lead to more and better PlayStation clusters. Read more of this story at Slashdot.

See more here:
Using Kexec Allows Starting Linux In PlayStation 4