Cubli is a clever little cube that uses reaction wheels to jump, balance and “walk” across stationary and dynamic surfaces alike. It reminds us a lot of MIT’s M-Blocks, only bigger , and… well… more balance-y. Read more…
More here:
Meet Cubli, a motorized box that balances perfectly on ONE CORNER
Square has just announced that it has acquired Evenly , a company that was built to make it easy for friends to send and receive payments for splitting bills and other expenses. The company was founded in 2012, and was similar in concept to Venmo, an NYC-based startup that was acquired by Braintree last year . Evenly offered a mobile app that let people send and receive requests for funds from their contacts list, organized around events and experiences. For each participant in a pool, it would list what a user owed and what they’d already paid, if any, and you could see progress towards the total cost of an event displayed visually, as well as send reminders to all parties involved that they have to pay up. There’s also an activity feed that tracks progress and adds a social element to the bill sharing. Evenly will remain open and active until January 15, 2014 for existing users, and the team says on its own blog that it will give existing users “plenty of time” to get money out of the app and finish collections. Users can find out more here at an FAQ designed to guide those who will be transitioning off of the service. The app has been removed from the App Store, however, and new user registrations are turned off completely. On Square’s Engineering blog, the payment company’s Product Engineering Lead Gokul Rajaram says that the Evenly team will be working on “seller initiatives,” and it seems likely this is designed to bring Evenly’s talented five-person engineering and design team into the fold to boost Square Cash and help it continue to ‘square’ off against the now Braintree-owned Venmo and Google Wallet.
Visit site:
Square Acquires Evenly, A Venmo Competitor For Sending And Receiving Payments With Friends
An anonymous reader writes “The U.S. Centers for Disease Control have announced that measles cases in the U.S. spiked this year, rising to three times their recent average rate. It’s partly due to a greater number of people traveling to the U.S. when they’re infectious, but also because a frustrating number of people are either failing to have their children vaccinated, or are failing to do so in a timely manner. Dr. Thomas Friedman said, ‘Around 90 percent of the people who have had measles in this country were not vaccinated either because they refused, or were not vaccinated on time.’ Phil Plait adds, ‘In all three of these outbreaks, someone who had not been vaccinated traveled overseas and brought the disease back with them, which then spread due to low vaccination rates in their communities. It’s unclear how much religious beliefs themselves were behind the outbreaks in Brooklyn and North Carolina; it may have been due to widespread secular anti-vax beliefs in those tight-knit groups. But either way, a large proportion of the people in those areas were unvaccinated.'” Read more of this story at Slashdot.
Hex3 , the company behind a successfully Kickstarted pressure-sensitive stylus called JaJa , and a follow-up stylus for tablets, called Nota , which had a (relatively) fine 3.7mm tip to make scribbling on a slate more precise, is expanding its line-up with three new stylus products – under a new brand name, YuFu. Once again, the startup has taken to Kickstarter to get the required minimum orders to fire up production of the YuFu, YuFu Pro and YuFu Focus. It’s seeking to raise $25,000, and is more than half way there with 30 days left on its campaign. If successful it’s aiming to ship to backers next April. It’s a couple of years since pressure sensitive styluses arrived so the YuFu is definitely facing more competition than Hex3′s earlier JaJa . Which presumably is why it’s spreading its bets with multiple models, as well as focusing on a premium, hardwearing build, with the YuFu rocking a slim, metal-case design that resembles a mechanical pencil. The YuFu Pro – aimed at “serious artists” – has 4,048 levels of pressure sensitivity, with the function built into the pen, rather than the tip so you vary how much you squeeze it, rather than how hard you press it against the glass (to limit fatigue). It also has tilt sensors for shading and calligraphy, optional gestures such as tap and shake to erase, plus an ultrafine tip (1.9mm). This model is $65 for Kickstarter backers, but will retail for $99 in future. The mid-range YuFu Focus has 64 levels of pressure sensitivity and the same ultrafine 1.9mm tip. Hex3 says this model is for “creative business and art school use”. It’s $49 for Kickstarter early birds, rising to $79 retail post-Kickstarter. While the basic YuFu – aimed at “anyone who uses a tablet for notes or drawing” but doesn’t need pressure sensitivity to vary the flow of digital ink or an ultrafine tip – offers the same hardwearing metal construction and interchangeable tips (with brush, teflon or rubber tips) that all the models have but is designed for less precise scribbling. This model is up for grabs at an early bird Kickstarter price of $25, rising to $39 retail post-Kickstarter. The YuFu styli are powered by 1x AAAA battery apiece. They use Bluetooth Low Energy to connect to the tablet, so are compatible with the iPad 3 and above, and the iPad mini. They will also work with other tablets that have support for BLE, according to Hex3 – so some Android tabs might also work. What apps can you use YuFu with? Hex3 hasn’t listed compatible apps by name, rather it says it will support “all of the Apps you could need”. And includes the below graphic depicting currently supported apps. It’s worth noting that functions such as the YuFu Pro’s Gyro sensor (to support shading) will only work with “integrated apps”. So if your art app of choice doesn’t appear below you may want to ask if they’re planning to support it before pledging any cash.
Read More:
YuFu Is A Range Of Bluetooth 4.0 Styli For Pro Digital Artists & Amateur Scribblers
There’s nothing like some casual rock precipitation to make you glad you packed your umbrella. Read more…
We’ve seen fire harnessed to power a phone charger for the great outdoors, with the nifty FlameStower , now meet Hydrobee: another Kickstarter project aiming to provide an off-grid alternative for charging a battery you can then use to juice your phone. But, as its name suggests, Hydrobee is all about water. There’s two parts to Hydrobee. When wearing its ‘Stream Body’, the gizmo can be placed in a river or dragged behind a boat – so long as the water is flowing faster than 1.8m/s (or 4mph+) – and two to four hours later its battery will be fully charged. A smaller inner unit can also be attached directly to a flowing faucet to charge – so could be used as a back-up power generator for your phone during a power outage (so long as your taps don’t require electricity to pump the water to them). Once Hydrobee’s battery is juiced, you can then plug in a USB device to charge it – a secondary charging process that presumably takes several more hours. Hydrobee reminds me of a CDT project I worked on in school, where we stuck a dynamo on a paddle wheel-bearing rig designed to float in a river and stuck a micro bulb on top that we hoped would be powered by it… Long story short it didn’t work on demo day, but that’s technology demos for you. Hydrobee has clearly perfected the hydroelectric tech better than a bunch of schoolkids managed to. The prototype consists of a tiny hydropowered turbine sited in a can with rechargeable batteries and waterproofed electronics, and a USB 2.0 port – so you can juice up your phone or other USB-powered device. The internal batteries are 6 x 1.2V AA NiMH rechargeable cells of 2,500 mAh capacity, yielding a total of 15,000 mAh. It is still a prototype for now. And Hydrobee’s U.S.-based creator has put a call out for Kickstarter users to give him feedback on the sorts of things they’d like to be able to use the device for to help shape the final product. The campaign is looking to raise $48,000 in crowdfunding, with 17 days left to run. If it hits its funding target, Hydrobees will be shipped to backers next March. The Hydrobee turbine generator, which can be used to generate a charge from water from a running faucet or hose, is being offered to early Kickstarter backers for $24. Or it’s $78 for all the kit, including the floating Stream Body.
More:
Hydrobee Lets You Charge A Battery From A Fast-Flowing River To Juice Up USB Devices Off-Grid
We are, I believe, in an interstitial zone when it comes to payments. Credit cards are still king – just ask Square – and NFC is just a dream in most countries. That’s why Coin is so interesting. It’s a credit card-sized device that holds other credit cards, allowing you to swap from card to card and even store gift cards inside its ultra thin innards. The company planned a pre-order campaign that would top out at $50,000. They blew past that goal in forty minutes today, a testament to the desire for folks to leave their plastic at home. The card itself is as thin as a regular credit card. I saw the near-final prototype and except for a raised button and a small (slightly unreadable) LCD. To use the card you select a payment type with the button and just swipe. The Coin card “mimics” your read credit or gift card. The technology is tightly packed inside the card’s plastic case. The card uses low-power Bluetooth to connect to your iOS device that is coupled with a standard credit card reader. You swipe your cards into the system and you’re done. The device holds up to eight cards. Engineer Kanishk Parashar is leading the Y-Combinator-backed company alongside investor and board member Manu Kumar . Parashar cut his teeth in payments with a startup called SmartMarket but this product seems to be his winner. The company isn’t new – a company called Flint is already in this space and I suspect a bigger player will probably beat Coin to the mass market. However, it’s a cool idea in a cool package and, clearly, the idea has caught fire. You can take a look at the product here and it ships this Summer.
More:
Coin, The Electronic Credit Card, Reaches Its Pre-Order Goal In 40 Minutes
Apple is said to be working on two curved display iPhone models for the “second half of next year,” according to a source speaking to Bloomberg , with a likely released planned for the third quarter, and building better touchscreen sensors that introduce fine pressure sensitivity for later devices to be introduced after that. These new iPhones for 2014 would come in 4.7 and 5.5-inch flavors, according to the report, meaning that Apple would be introducing not one, but two different models at the same time, in theory. We’ve seen reports of Apple working on different models of large-screen devices in the past, including one from the Wall Street Journal that suggests it’s been working on different tests of devices with screen sizes between 4.8 and 6 inches. This is the first time we’ve really heard firm information about a possible release date for said devices, from a source as generally reliable as Bloomberg. A Japanese iOS rumor site claimed a September launch for a large-screen iPhone late in October, however, and two reliable analyst sources predict a 4.7-inch iPhone 6 bound for stores in late 2014. Apple also introduced precedent for doing two models of new iPhone at once this year with the iPhone 5s and iPhone 5c, so the idea that it could do so again in the future makes some sense. But two new larger-screened devices at once does seem like a stretch – thought if Apple retained an iPhone 5c as its third, budget device and added two more to the mid-tier and high-end range, that might allow it to do so without adding crazy complexity to its product lineup. The sensor developments are potentially more interesting to those who find the current screen size of the iPhone adequate; true pressure sensitivity (currently, some crude extent of that is possible via the iPhone’s accelerometer) would make drawing and handwriting applications on the iPhone and iPad much, much better. Apple could sell the devices as professional-level artistic devices if it introduces those kinds of features, in addition to just making things better for everyday users who want to jot notes and doodle, for example, or perform minor photo touch-ups. It’s very early days to make any kind of judgement about the likely accuracy of these claims, but the source gives it some weight. Apple’s iPhone joining the ranks of bigger-screened devices definitely makes sense as a next move for the lineup, but curved glass manufacturing also seems quite expensive at this point for Apple to be considering launching two new devices with that feature at once. Via 9to5Mac . Photo courtesy MyVoucherCodes.co.uk .
View post:
Apple Reportedly Developing Large Curved Screen iPhones For Late 2014, Better Touchscreen Sensors
Normally, intentionally elongated or flattened skulls are associated with ancient Mesoamerican cultures . But this exquisite specimen, which dates back some 1, 500 years, was recently found at a dig in Alsace, France. Read more…
Read More:
French Archaeologists Discover Beautifully Preserved Deformed Skull
Like the Samurai’s mempo , the uniforms of many of today’s Special Forces units play dual roles. Not only do they protect the wearer’s face and conceal his identity, they terrify the pants off of the enemy. Take the newly unveiled uniforms of Taiwan’s Special Forces for example. They look like something out of Army of Two . Read more…
More here:
Taiwan’s New Special Forces Uniforms Are Wearable Nightmare Fuel