2016 Chevrolet Volt first drive

There’s a hit vehicle hiding in GM’s formula for the Chevy Volt. You can sense it in the enthusiasm that current Volt drivers have for their cars. You can see it in the amount of money GM has poured into its extended-range electric vehicle project. And perhaps most importantly, you can feel it from the driver’s seat of the new, second-gen model. The big question is whether or not GM will be able to turn its much-hyped ‘halo car’ into a best-seller this time around. After driving it in northern California, I can tell you that the Volt is tremendous. But we all know it takes more than that to create a hit.Slideshow-324913 GM has so far sold over 82, 000 Volts in the US. That’s respectable, but in the early, glory days before the car launched, company representatives were talking about much more impressive numbers . With a few years to talk to customers and potential prospects, GM has learned a lot about what makes someone buy a Volt. For the 2016 model, Chevy has changed just about everything for the better. The new Volt has more all-electric range (53 miles vs. 38 in the first generation), is more fuel efficient whether you’re looking at the overall value (106 combined MPGe vs. 98) or just when the car burns gas (42 miles per gallon vs. 37). All of that means that the car’s overall range is bumped up to 420 miles, from 380. The battery is smaller and lighter while offering more energy capacity. The range-extending gas engine is bigger (1.5 liters vs. 1.4) but it’s also more efficient and can burn regular gasoline instead of just premium. The Volt’s overall range is bumped up to 420 miles, from 380. The cost is lower, too: $33, 995 vs. $34, 170, before incentives. This is a car that GM thinks will compete against the Toyota Priuses and Nissan Leafs of the world (as its new ads make abundantly clear ). All three cars have completely different powertrains, but we all know that they’re the headline green cars of our time (along with Tesla), so buyers will have to want to pony up a bit more money if they like what the Volt is offering. The 2016 Leaf with its 107-mile range starts at $37, 640 (before incentives), while a 2015 Prius can be had for $24, 200 (pricing for the 2016 has not yet been announced). So, on paper, the new Volt is an all-around winner. I’m here to tell you that it wins on the road, too. You can’t help but notice the changes. They are literally front and center. When GM introduced the first Volt, the world was enamored by chic while iPods, and the Volt design team thought a giant, touch-sensitive panel was a way to make us love their plug-in car. Instead, that was one of the worst features of the first Volt. In the new model, the panel has been deleted like skeuomorphic design in iOS. In it’s place is a perfectly sized, eight-inch infotainment screen and HVAC controls. It feels strange to give thanks for real, physical buttons, but it’s simply true that they work better in almost all vehicles than a touchy-feely flat surface. Despite the new look that takes a step away from the iPod-ness of the original, the new Volt will totally love your smartphone, thanks to built-in Apple CarPlay and Android Auto software. The new Volt seats five, instead of four, and the interior and exterior have both been upgraded to something I would truly like to see in my driveway every morning. The new Volt seats five, instead of four, and the interior and exterior have both been upgraded to something I would truly like to see in my driveway every morning. My test vehicle had the Jet Black/Brandy two-tone interior. It looks great, but the big brown swoops of color that extend the inside of the door to the top of this dashboard can be a hassle. In the right sunlight, these threw unfortunate beige reflections onto the windshield. I was able to look through them most of the time when I focused on the driving, but if I were to buy a 2016 Volt, I’d choose a darker material here, for sure (there are four interior color and material options, with the most expensive leather adding $1, 340 to the price). While there’s plenty of room in the front seats for two fullsize adults, the rear really only seats three in a pinch. Unlike in the first-gen Volt, the battery pack no longer bumps up into the rear seats. Sadly, it still runs through the rear seat leg area, so whoever sits in the middle will have to straddle the bulge the whole time. It’s a small price to pay for the efficiency you gain, but something to be aware of. If you’re not trying to go all clown car with the Volt, there is enough head- and legroom in the front and back to fit four adults in the car, unless your friends all have six-foot, two-inch frames . Looks are subjective, but I find the 2016 Volt to be a fine piece of aerodynamic muscle. As wind tunnel time becomes more and more important, the general “aero” shape that defines cars like the Volt and the Prius are going to get more and more prevalent. To find an identity within that shape is going to become more of a challenge, but GM is onto something with the Volt’s evolution. There are no wasted lines, no excess shapes. The design is clean without being bland, and the new look even comes with better rear visibility from the driver’s seat. The 2016 Volt comes in seven exterior colors , three of which are a $395 premium choice. Speaking of options, my volt stickered for $39, 830 with two “driver confidence” packages and a nav system. These packages each add $495 to the price, and the first one gives you Side Blind Zone Alert, Lane Change Alert, and Rear Cross Traffic Alert. If you get the first, you can opt for the second, which includes things like Forward Collision Alert, Lane Keep Assist and Low-speed Front Automatic Braking. You can chirp the new Volt to 30 miles per hour in a quick 2.6 seconds and a 0-60 run will take you 8.4 seconds. There is only one powertrain option, the Voltec drive unit. This includes the 1.5-liter Ecotec gas engine and an 18.4-kWh lithium-ion battery that sends juice to two electric motors (one offering 87 kW and the other 48 kW and no rare earth metals). This arrangement is up to 12-percent more efficient and 100 pounds lighter than the older Volt powertrain while still offering 294 pound-feet of torque and 111 kW of electric drive power. More importantly for how the car drives, Chevy has improved both the 0-60 and 0-30 times, by seven and 19 percent, respectively. That means that you can chirp the new Volt to 30 miles per hour in a quick 2.6 seconds and a 0-60 run will take you 8.4 seconds. In the hills of Marin county, this proved particularly fun, especially since the steering feels spot on. It’s not mushy or too tight, and feels effortless (in a good way) when you need it in the curves. Even though I’ve driven just about every plug-in vehicle available in the US and many that you can’t get here, I have yet to be bored with the instant acceleration of an electric vehicle. The new Volt comes in near the top of the pack in the “EV Grin” category. The low center of gravity, the 3, 543-pound curb weight, and the enhanced body structure all come together in a fun, punchy compact that lets you throw yourself through winding corners without emitting anything from the tailpipe. Of course, once you’ve spent your battery, the new Volt performs mostly the same, unless you really step on the gas. That’s when the loud-ish internal combustion engine makes its presence known and it feels like the acceleration doesn’t provide quite as much of a kick as it did when you’re only burning electrons. In normal driving, though, going 60 or 70 miles per hour on the highway, you most likely won’t notice the engine or hear much wind or tire noise, so commutes of any distance will be managed just fine with the new Volt. The transition when the gas engine kicks on is also imperceptible. You’ll have to be paying close attention to notice, even though the cabin is remarkably quiet on normal road surfaces. Chevy took a feature from the Cadillac ELR for the second-gen Volt, too. On the back, left side of the steering wheel, there’s a little paddle that engages the Regen On Demand feature. In practice, pulling the paddle feels like you’ve brushed the brake pedal or shifted down a gear. In reality the paddle engages the car’s regenerative brakes; an efficient way to recuperate energy and engage the driver. There’s real potential for the second-gen Volt to be a big hit. My drive was comprised of two routes, totaling 77 miles. The first leg started off with a full battery, so all 33.2 curvy, hilly miles were completed with 21 miles of EV range left in the pack. The second trip, of 34.6 mostly highway miles, was done using only gas (we didn’t have time to recharge) and the display said I managed 39.4 mpg. Combined with my drive partner’s time behind the wheel, we put 107.4 miles on the Volt, averaging 77.2 mpg and using up 14.2 kWh of battery for 50.8 miles and 1.39 gallons for 56.7 miles. The long and short of these numbers? It looks like the EPA got it right here. Fifty miles is a totally reasonable distance to expect from the new Volt, and you’ll almost certainly get 40 or so mpg if you go beyond that – and you won’t need to use premium gas to do so, like you did in the first-gen Volts. So many little improvements. Turns out, the 2016 Volt matches all its hype; it’s an efficient, no-compromise EV. My on-road experience tells me that there’s real potential for the second-gen Volt to be a big hit and I’ve now got my reasons why I think all of these changes, updates, and tweaks will turn a lot more people onto the Volt. Of course, I recognize that gas prices remain low right now, a lot of people still don’t understand what it means to plug in a car, and GM still hasn’t quite figured out how to market this plug-in hybrid, so there are hurdles to overcome. Still, the pieces are in place. Whether or not these things fly of dealer lots in the next 12 months is a story we will be watching with extreme interest. The 2016 Volt will be available in 11 states this fall. The rest of the US will get their first crack at the second-gen Volt with the 2017 model year next spring.

View article:
2016 Chevrolet Volt first drive

Mealworms convert Styrofoam waste into usable soil

Researchers have found a scourge for the 33 million tons of plastic dumped each year in the US: mealworms. A team from Stanford and China’s Beihang University found that the beetle larvae stay perfectly healthy eating just Styrofoam, which is normally considered non-biodegradable. Better still, the worms convert the plastic to CO2 and waste that’s safe to use as soil for crops. The scientists were as surprised by the discovery as you might be. “There’s a possibility of really important research coming out of bizarre places, ” said Stanford professor Craig Criddle. “This is a shock.” Mealworms don’t have some kind of magic digestive system, of course. Earlier research has showed that microorganisms in the stomachs of Indian mealmoths can digest the polyethylene plastic used in garbage bags. The scientists now plan to study such bacteria to see whether they can biodegrade plastics used in automotive components and microbeads that pollute water supplies. The goal is to eventually cut out the middleman (“middleworm”?) and isolate the bioenzymes used by microorganisms to break down the plastics. That could result in new methods of reducing plastic waste that’s already in the environment, and new types of bio-plastics that won’t accumulate on land or at sea. Source: Stanford University

Link:
Mealworms convert Styrofoam waste into usable soil

Raytheon signs $1 billion contract to protect government websites

Homeland Security has signed a five-year contract with Raytheon, which could be worth a whopping $1 billion. While the defense contractor is more known for weapons development, DHS hasn’t joined forces with it to create more missiles , lasers, warheads and UAVs . No, the agency has asked the company’s help to secure government websites. According to Raytheon’s announcement , it will aid the government in developing, deploying and supporting technologies that watch out for and mitigate cyberattacks. Reuters says the company will also help around 100 agencies manage their network security within the duration of the partnership as the prime contractor for DHS’ National Cybersecurity Protection System and Network Security Deployment divisions. After that massive Office of Personnel Management hack earlier this year (and the knowledge that other .gov websites are susceptible to attacks), it’s clear that the government believes it could use the cybersecurity upgrade Raytheon promises to bring to the table. And since the White House wants to start being more aggressive in securing its networks, this isn’t the government’s only anti-cyberattack project in the works. The Pentagon, for one, is building an automated system that can detect and prevent security breaches. [Image credit: Getty Images/Caiaimage] Via: Reuters Source: Raytheon

See more here:
Raytheon signs $1 billion contract to protect government websites

AmpMe daisy-chains a bunch of phones to create a multi-speaker setup

Generally speaking, if you thought you might want to blast music while out and about, you’d invest in a Bluetooth speaker. If the sound quality there wasn’t quite robust enough, you’d either get yourself a bigger speaker , or maybe even link together a few smaller ones . Either way, prepare to spend a few hundred dollars. Or not. A new app called AmpMe promises to achieve the same effect, except instead of asking you to shell out for new hardware, it daisy-chains an unlimited number of smartphones so that they stream the same song in sync, combining each handset’s speaker into something… cacaphonous.Slideshow-322368 The free app, available for iOS and Android, doesn’t use Bluetooth or WiFi, but rather, plays an audio “fingerprint” on the host device (a series of beeps, to the human ear) that gets picked up by the mic on the receiving phone. Everyone involved needs to have the app installed, and anyone joining in needs to request a passkey for the music party before receiving that unique audio code. The host can shut down the party at any time with the push of a button, whereas receivers can pause the music for, say, a phone call, and pick back up with the rest of the group, wherever they happen to be in the song. For now, the app only works with Soundcloud. Founder Martin-Luc Archambault says that’s because Soundcloud is free, making it accessible to the most people, but that his team is working on inking deals with other streaming services as well. Ultimately, he says, he wants it to be “Sonos for cellphones.” In a brief demo last week, the various phones and tablets that were paired together did indeed play music in sync, without any latency on any of the devices. AmpMe has clearly shown, then, that it’s possible to turn a series of mobile devices into an ad hoc multi-speaker setup — no small feat. The problem is that the audio quality on most phones and tablets is frankly terrible. Unless you happen to have, say, an HTC phone with BoomSound , you’re probably working with tinny, contained audio that only gets more distorted as you crank the volume. Or, in this case, create a chorus of equally tinny-sounding devices. It’s great to know that the technology has evolved such that it’s possible to daisy-chain phones like this and have them stream music perfectly in sync. Now we just need to wait the phone makers to catch up. Source: iTunes , Google Play

Continued here:
AmpMe daisy-chains a bunch of phones to create a multi-speaker setup

For the first time, a paraplegic has walked without a robotic suit

A paraplegic has walked without robotics using his own brain waves, thanks to research done at Southern California’s UC Irvine . Scientists used a computer to “link” 28-year-old Adam Fritz’s brain to his legs over a Bluetooth connection, bypassing the severed region of his spinal cord. An EEG then picked up signals from his brain, which were relayed by a “brain-control interface” (BCI) computer to electrodes on his knee, triggering walking movements. Though Fritz was supported and only walked haltingly for 12 feet, the research is being heralded as a milestone — so far, paralyzed patients have only be able to walk using suits like that from Ekso Bionics . It wasn’t just a matter of strapping on the EEG cap and taking a stroll. Prior to the attempt, Fritz underwent extensive physical rehab to strengthen his muscles and learned to control a virtual avatar using the BCI device. He also made similar movements in the lab while suspended slightly above the floor. During a conversation with Sky News , Fritz dubbed the interface a “mind walker, ” and said, “it’s complete concentration. You have to think about every single step when you’re doing it.” Despite the success, the team said there’s still a lot of work to be done before patients can gain any mobility. The next step is to reduce the EEG components enough that they can be implanted in the brain, which could give patients more precise control the and the ability to “sense” pressure. Meanwhile, Fritz described the experience as “incredible, ” saying, “when you’re first injured, you’re sitting in hospital hoping you’ll walk again, but when it actually happened it was a dream come true.” Source: JNER

Visit link:
For the first time, a paraplegic has walked without a robotic suit

Gel-filled touchscreen creates real buttons on demand

There’s just something about the feeling of physical keys that haptic feedback simply can’t replicate on touchscreens. It’s part of the reason people buy keyboard accessories for tablets , or Ryan Seacrest’s strange iPhone case . It’s also inspired some to try to figure out a happy medium between the freedom of touchscreens and the tactile joy of real buttons. Tactus’ fluid pocket approach showed promise (the company makes an iPad case that gives the on -screen keyboard a physical presence), but it’s ultimately limited by a predefined layout. Now, though, a group of researchers at the Technische Universität Berlin have come up with a way to create soft, temporary buttons of pretty much any shape and size, anywhere on a touchscreen display. To make this magic happen, the researchers are using a heat-activated gel that’s transparent and fluid at room temperature, but hardens into an opaque, defined shape when warmed. The team’s “GelTouch” 7-inch prototype is fronted by a layer of this gel, with another layer of conductive film behind that. The film carries electrical current (and therefore heat) to discrete areas of the display, creating a variety of button layouts — proof-of-concept patterns include a rectangular key arrangement, a slider (albeit made from a row of the same keys), and a joystick-like nub. (You can check out a video of the team’s work here .) The GelTouch prototype isn’t exactly polished, but the researchers imagine the technology being used not only to bring tactile feedback to flat displays, but also where “feeling” your way around a touchscreen would be beneficial — on a car’s infotainment system, for example, so you can keep your eyes on the road. There are plenty of issues that still need to be overcome, however. For starters, the gel requires constant power to stay “activated, ” and there’s a lag period of a few seconds between soft and hard states. Also, the gel isn’t transparent when it takes on a distinct form, so you might have trouble typing on a keyboard, for instance, when you can’t see the letters behind white blobs of the hardened material. Still, it’s certainly an interesting concept, and who knows? One day we mightn’t need to choose between the clean face of an all-touchscreen smartphone, and the typing prowess of a BlackBerry . Via: MIT Technology Review Source: Jörg Müller (PDF)

Excerpt from:
Gel-filled touchscreen creates real buttons on demand

Fighting game inspired by ‘My Little Pony’ needs cash to become reality

Them’s Fightin’ Herds started life as My Little Pony: Fighting is Magic , a fighting game created by My Little Pony: Friendship is Magic fans and starring characters directly from the show. That project was shut down when Hasbro sent the developer, Mane6, a cease-and-desist order in February 2013 — but it was reborn when Friendship is Magic producer Lauren Faust and Skullgirls studio Lab Zero Games hopped on board. Now, Them’s Fightin’ Herds is a serious fighting game starring a cast of original characters designed by Faust and running on Skullgirls ‘ engine. This week, Mane6 launched a $436, 000 Indiegogo campaign to fund 18 months of full-time development on Them’s Fightin’ Herds , and in two days it’s raised more than $100, 000. This time around, it looks like crowdfunding is magic. Via: Gamesradar+ Source: Indiegogo

See the article here:
Fighting game inspired by ‘My Little Pony’ needs cash to become reality

Ultimate VR simulator throws you around in mid-air

Virtual reality headsets can trick our eyes and ears into believing we’re someplace else. Fooling the rest of the body is a little trickier though. Companies have tried spinning chairs and omnidirectional treadmills , but nothing comes close to the ” Cable Robot Simulator ” developed at the Max Planck Institute for Biological Cybernetics. The player wears a wireless VR headset inside a carbon fibre cage, which is then suspended in mid-air and thrown around the room using eight steel cables. The exposed pod is able to tilt, bank and move with an acceleration of up to 1.5g in response to the VR experience. Researchers have shown off some basic flight and racing simulations, but we’re already imagining how it could be used in our favorite video games. A dogfight in Star Wars: Battlefront ? Tearing around corners in F-Zero GX ? The possibilities are endless. It’s still very much a prototype, and hardly suitable for home use, but we’re desperate to have a go ourselves. [Image Credit: Max Planck Institute for Biological Cybernetics, Tübingen] Via: Eurogamer Source: Max Planck Institute for Biological Cybernetics

View post:
Ultimate VR simulator throws you around in mid-air

Physicists successfully map individual atoms in 3D

Technology can evolve at such a rapid rate that many scientific discoveries are not just pushing boundaries, they’re practically barging them. Example, Physicists at UCLA have managed to 3D-map the position of individual atoms to a precision of 19 trillionths of a meter (that’s several times smaller than a hydrogen atom, for those of you playing at home) using a creative scanning technique. The method will help scientists and engineers build things — such as aircraft components — that lack point defects (i.e. missing atoms) that can have detrimental effects on structural integrity. The new procedure is called “scanning transmission electron microscopy” and works by passing an electron beam over a sample and measuring how many electrons interact with the atoms in said sample. Different arrangements of atoms react with the electrons in different ways so the outcome is unique to a particular atomic structure. The team conducts the initial scan which produces a 2D image, and in order to get to the final 3D product, they combine several scans from different angles. The downside of this technique is that multiple scans can potentiality damage the sample. The research is led by Jianwei (John) Miao, a UCLA professor of physics. Currently, a method known as X-Ray crystallography is used to map the layout of billions of atoms at a time, but has never been able to pinpoint an atom’s exact coordinates. This all encompassing procedure makes identifying a missing atom impossible. “Our measurements are so precise, and any vibrations — like a person walking by — can affect what we measure, ” said Peter Ercius, a staff scientist at Lawrence Berkeley National Laboratory. The team of UCLA scientists who happened across this discovery now plan to use it in order to study magnetic properties. [Image Credit: Mary Scott and Jianwei (John) Miao/UCLA] Source: UCLA Newsroom

View post:
Physicists successfully map individual atoms in 3D

Feds recover emails from Hillary Clinton’s private server

The FBI has recovered emails from the private server Hillary Clinton surrendered to the Justice Department back in August, according to Bloomberg . If you recall, Clinton admitted to deleting all her personal correspondences long ago but turned over copies of her work emails (around 30, 000 in number) to the government. You can even read thousands of them — mostly schedules, press clippings, speech notes and the like — on the State Department’s website. However, she decided to hand over her server anyway after the Intelligence Community Inspector General told Congress that some of the work emails she turned in could be classified as “top secret.” Now, the feds have managed to salvage those deleted digital missives, though it’s unclear if they were able to restore them all or just a few. Bloomberg says the FBI is now hard at work segregating the pile, separating truly personal ones ( e.g. Chelsea Clinton’s wedding details and yoga routines) from those that can still fall under the “work” category. The authorities’ investigation is expected to last a few more months, though, so it could take a while before we find out whether other top secret emails were among the deleted ones. [Image credit: Shutterstock / Frontpage] Source: Bloomberg

See more here:
Feds recover emails from Hillary Clinton’s private server